Seiko LP-1020L Uživatelská příručka stáhnout pdf (Strana 28)

Note

◆ Until you are ready to install the Process

cartridge, do not unpack it and store it in its

cardboard container.

◆ Firmly hold the handles on both sides with both

hands when handling the Process cartridge.

◆ Take care not to scratch the surface of the

photoconductor drum during handling.

◆ With the exception of the handle area, take care

to avoid contacting the surface of the

photoconductor drum.

◆ Except when you Install the Process cartridge

into the device body, keep the cover on the

Process cartridge to protect the photoconductor

drum and to prevent optical deterioration.

◆ Some black developing toner may be visible on

the photoconductor drum of a new Process

cartridge. This is to ensure that the cartridge is

kept in a ready-to-use condition at all times, so

you may use it as it is. After the cartridge is

mounted on the device body, cleaning will

automatically start so you need not worry about

the liquid affecting printing quality.

◆ Since waste toner remains in the used Process

cartridge, take care not to shake it strongly, tilt it

sharply, or hit it with force as this may cause

waste toner to spill out.

◆

Process cartridge replacement procedures

Turn off the device power and open the top

cover.

Take out the Process cartridge.

Pull the Process cartridge out by holding onto its

handles.

Place a new Process cartridge on the top

of the device.

1Remove the Process cartridge from the box together

with its protective case.

2Place the Process cartridge on the top of the device

together with the protective case.

Two types of filters for replacement use are contained

in the process cartridge packaging box. Replace the

filter after replacing the process cartridge.

Remove the orange tape.

Remove the orange tape affixed to the Process cartridge

(4 points).

A sheet is attached to the tape at (2 points) on the inside.

Remove the sheet together with the tape.

Remove the Process cartridge from its

protective case.

While holding onto the handles, open the protective

case while pushing with your thumbs and remove the

Process cartridge from the protective case.

1 2 ... 23 24 25 26 27 28 29 30

Komentáře k této Příručce

Žádné komentáře

Seiko LP-1020L Uživatelská příručka Strana 28

Komentáře k této Příručce

Související produkty a manuály pro Plotrový papír Seiko LP-1020L