Seiko TM-L60 Specifikace stáhnout pdf (Strana 48)

Rev. A Command Descriptions 1-41

TM–L60II/L60IIP Information Manual

Status Commands

The TM-L60II/L60IP printers support the following status transmission commands. These

commands can be used to determine the status of the printer, paper sensors, and peripheral devices

connected to the printer.

Command Name

GS a Enable/disable Automatic Status Back (ASB)

GS r Transmit status

DLE EOT Real-time status transmission

ESC u Transmit peripheral device status

ESC v Transmit paper sensor status

GS a n

[Name] Enable/disable Automatic Status Back (ASB)

[Format] ASCII GS a n

Hex 1D 61 n

Decimal 29 97 n

[Range] 0 ≤ n ≤ 255

GS a n selects a status for ASB transmission. ASB is enabled if any status item is selected. The printer

automatically transmits a 4-byte status message whenever the status changes. Multiple status items

can be selected. When n=0, ASB is disabled. The default (n=0 or n=2) depends on the DIP switch

settings. If ASB is enabled when the printer is disabled by the ESC = command, the printer transmits

a 4-byte status message whenever the status changes. The status items are selected using n as follows:

Bit Off/On Hex Decimal Status for ASB

Off 00 0 Drawer kick-out connector pin 3 status disabled.

On 01 1 Drawer kick-out connector pin 3 status enabled.

Off 00 0 On-line/off-line status disabled.

On 02 2 On-line/off-line status enabled.

Off 00 0 Error status disabled.

On 04 4 Error status enabled.

Off 00 0 Paper roll sensor status disabled.

On 08 8 Paper roll sensor status enabled.

4-7 — — — Undefined.

Program Exam ple

PRINT #1, CHR$(&H1D);"a";CHR$(4);← Enable "Error" status

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 97 98

Žádné komentáře

Seiko TM-L60 Specifikace Strana 48